Here are the simple and basic steps in designing your own dining table.
1. Buy a piece of plywood with the thickness of ¾ inches.
2. Cut off 6 inches the plywood using the table saw and design curved corners by utilizing the router.
3. Get a piece of wood lumber cut into four pieces to size. You can also buy ready made table legs.
4. Look for a flat surface and put the plywood with the underside up. Screw on each leg and join it using the drill and screw driver. Connect the legs by means of 2 inch screws on each leaving 5 to 6 inches overhand on each corner.
5. Toss the table over ensuring that it is eve. You can make necessary adjustments when you think it is unstable.
6. Sand the top and sides of the table top until it is smooth and free from splinters. Use tack cloth in removing the dust.
7. As a finishing touch, paint the completed table and let it dry before using.
1. Buy a piece of plywood with the thickness of ¾ inches.
2. Cut off 6 inches the plywood using the table saw and design curved corners by utilizing the router.
3. Get a piece of wood lumber cut into four pieces to size. You can also buy ready made table legs.
4. Look for a flat surface and put the plywood with the underside up. Screw on each leg and join it using the drill and screw driver. Connect the legs by means of 2 inch screws on each leaving 5 to 6 inches overhand on each corner.
5. Toss the table over ensuring that it is eve. You can make necessary adjustments when you think it is unstable.
6. Sand the top and sides of the table top until it is smooth and free from splinters. Use tack cloth in removing the dust.
7. As a finishing touch, paint the completed table and let it dry before using.
No comments:
Post a Comment